ADM08D Digital Multimeter True RMS Readout for Current, Voltage, Temperature
This multimeter, or any instrument like it, will be used to monitor the actual current flow during your CES / tDCS implementation. It is determined that a 2.0 milliamps of current is enough to obtain a noticeable improvement in cognition and depression.
This ADM08A is a premium version, which can be used for various testing parameters:
- circuit amperage,
- voltage test,
- capacitance test, and;
- temperature test
CES / tDCS Metering
Here’s how you connect the multimeter to the system:
When doing CES treatment, the multimeter selector switch is turned into the AC ammeter setting, or A~. Due to its reversing polarity, it doesn’t matter which ear does the electrode go. There’s no problem with polarity because it is reversing all the time.
So, the electrodes can be placed behind the ear, or clipped in the lobule of the ear.
What is critical though, is to place the negative cable of the CES device to the GND socket of the meter, at all times. This will prevent any accident later on when the treatment is switched into the tDCS modality.
When doing tDCS treatment, the multimeter selector switch is turned into the DC. ammeter setting, or A-. The negative cable from the CES device is plugged into the GND socket of the meter.The other cable that will be coming out of the mA socket of the meter will serve as the cathode, or the negative electrode.
The positive cable from tDCS device, or the anode, will go to the specific location in the head. The actual placement of the electrodes for tDCS will depend on the actual objective of the user.
The best option is not to place the negative electrode anywhere in the head. Dr. Robert O. Becker emphasized that the farther one measures the voltage away from the head, the more negative the reading is. This suggests that the head should be reserved for anode, or positive polarity only.
Measurement range : 0 – 6000
Max. Display: 6000 Counts
DC Voltage: 600mV / 6V / 60V / 600V / 1000V
AC Voltage: 6V / 60V / 600V / 1000V
DC Current: 60uF / 6mA / 60mA / 600mA / 20A
AC Current: 6mA / 60mA / 600mA / 20A
Resistance : 600ohm / 6Kohm / 60Kohm / 600Kohm / 6Mohm / 60Mohm
Frequency: 60Hz / 600Hz / 6KHz / 60KHz / 600KHz / 6MHz / 10MHz
Capacitance: 6nF / 60nF/ 600nF / 6uF / 60uF / 600uF / 6MF / 60MF
Low Battery Indicator: Yes
Backlit Display: Yes
Diode Test: Yes
Package weight: 0.562 kg
Product size (L x W x H): 19.00 x 9.00 x 5.00 cm / 7.48 x 3.54 x 1.97 inches
Package size (L x W x H): 21.00 x 12.50 x 6.00 cm / 8.27 x 4.92 x 2.36 inches
Package Contents: 1 x True RMS Digital Multimeter, 1 x Test Lead Pen ( Pair ), 1 x Temperature Probe, 1 x English Manual
Product Safety Disclaimer
We don’t take any responsibility or liability for the misuse of this, or any other product. All of our products are extensively tested to comply with rigorous and strict QC standards. We recommend proper supervision for minors, as we cannot be held liable for its misuse or accidents.